Our Machinery Products


CNC Turning Machine

The CNC Turning Machine is used to turn components between 10mm and 300mm in diameter. The machine can handle a component length up to 300mm. It has a repeatability of ± 15 microns.

CNC Turning Machine

About

The CNC Turning Machine is used to turn components between 10mm and 300mm in diameter. The machine can handle a component length up to 300mm. It has a repeatability of ± 15 microns.


CNC Machining Centre

About

The CNC Machine Centre is used for milling components. The machine can handle a component size of 800 x 900 x 1200 mm. It is a three dimensional machining centre.

CNC Machining Centre

The CNC Machine Centre is used for milling components. The machine can handle a component size of 800 x 900 x 1200 mm. It is a three dimensional machining centre.


CNC Turning Centre

The CNC Turning Centre is used to turn components between 10mm and 450mm in diameter. The machine can handle a component length of 1000mm between centres. It has a repeatability of ± 20 microns.

CNC Turning Centre

About

The CNC Turning Centre is used to turn components between 10mm and 450mm in diameter. The machine can handle a component length of 1000mm between centres. It has a repeatability of ± 20 microns.


CNC Turning Centre II

About

This machine is used to turn components between 10mm and 550mm in diameter, and it can handle a component length of 1200mm between centres. The machine has a repeatability of ± 10 microns.

CNC Turning Centre II

This machine is used to turn components between 10mm and 550mm in diameter, and it can handle a component length of 1200mm between centres. The machine has a repeatability of ± 10 microns.


Radial Drilling Machine

The Radial Drilling Machine is used to drill holes up to 65mm in diameter and tapping up to 25mm. It can handle a diameter of up to 1200mm.

Radial Drilling Machine

About

The Radial Drilling Machine is used to drill holes up to 65mm in diameter and tapping up to 25mm. It can handle a diameter of up to 1200mm.


Cutting Machine

About

The Cutting Machine, as the name suggests, is used to cut raw material for various components. The machine can handle a diameter up to 400mm.

Cutting Machine

The Cutting Machine, as the name suggests, is used to cut raw material for various components. The machine can handle a diameter up to 400mm.


Chuckmatic Machine

The Chuckmatic Machine turns components between 10mm and 250mm in diameter. The machine can handle component length up to 150mm. The Chuckmatic Machine is primarily used when the volume of components is between 3000 to 5000 per day.

Chuckmatic Machine

About

The Chuckmatic Machine turns components between 10mm and 250mm in diameter. The machine can handle component length up to 150mm. The Chuckmatic Machine is primarily used when the volume of components is between 3000 to 5000 per day.